The proportioning valve is mounted between the stabdis line master cylinder and the rear wheels. It's designed to adjust the pressure between the front and rear brakes, depending on how hard you're stopping. The shorter the stopping distance, the more of the vehicle's weight is transferred to the front ratai. This will cause the rear wheels to lift and the front wheels to "dive" down. The valve controls how much pressure is applied to each of the braking system's axle sets. In the case of the short stop, it will direct more pressure to the front wheels and less pressure on the rear wheels. The proportioning valve is the key component to a safe, reliable braking system . The instructions below will guide you as how to install a proportioning valve.
Check your owner's manual and familiarize yourself with your car's braking system
Raskite pagrindinį cilindrą. Pamatysite dvi stabdžių linijas, išeinančias iš pagrindinio cilindro. Proporcinis vožtuvas yra ant linijos, esančios arčiausiai variklio.
Nuimkite seną vožtuvą, nupjaudami jį iš abiejų linijos pusių. Šiam veiksmui naudokite vamzdžių pjaustytuvą. Įstumkite naują vožtuvą į vietą, pritvirtindami jį vamzdžio sriegio sandarikliu. Vožtuvas turi būti šalia stabdžių antiblokavimo sistemos (ABS) valdymo bloko.
Make sure the valve isn't touching or rubbing against any brake lines, as this will cause wear and tear, and can endanger the passengers in the car.
Įdėjus naują vožtuvą, išleiskite orą iš stabdžių, kad pašalintumėte linijoje įstrigusį orą.
Įpilkite tiek naujo stabdžių skysčio, kiek reikia, kad pasiektumėte reikiamą lygį.
Take the car for a test drive and make sure the brakes are working properly Pasidaryk pats.